Coating: | Coating |
---|---|
Tooth Form: | Spiral Tooth |
Structure: | Indexable Type |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Square | Square(ALU) | Ball Nose | Corner Radius | |
Flutes | 2/4 | 2/3 | 2/4 | 4 |
Helix Angle | 35/35 | 45/55 | 35/35 | 35 |
HRC45 | HRC55 | HRC60 | HRC65 | |
Raw material | YG10X | ZK30UF | ZK40SF | GU25UF |
Coating color | Black | Copper | Black-Nano | Blue-Nano |
Coating composition | AlTiN | TiSiN | AlTiSiN | AlTiSiN |
Coating advantage | High aluminum content provides excellent hot hardness and oxidation resistance | Containing silica, very high surface hardness and high thermal resistance | Use nano-tech, the hardness and thermal stability are up to 4000HV and 1200°C , respectively | Use nano-tech, the hardness and thermal stability are up to 4000HV and 1200°C , respectively |
Suitable for | Carbon Steel Alloy Steel Cast Iron Aluminum Alloy Copper Alloy |
Carbon Steel Alloy Steel Cast Iron Dead-Hard Steel Aluminum Alloy Copper Alloy |
Carbon Steel Alloy Steel Cast Iron Dead-Hard Steel Stainless Steel Aluminum Alloy Copper Alloy |
Carbon Steel Alloy Steel Cast Iron Dead-Hard Steel Stainless Steel Aluminum Alloy Copper Alloy |
Application |
2-Flutes tungsten end mill cutter is widely used in slotting, sinking etc. Wide range of use. |
3-Flutes is usede for slotting, side milling, heavy cutting and finishing. |
4-Flutes is suitable for shallow slotting, side milling and finishing. |
Difference Between Hardness And Coatings
Speed Date
Note: the above table is the standard value of milling cutter side milling. When the
cutter is used to process keyway, the feed speed is 50% ~ 60% of the above table, and
the rotation speed is 50% ~ 70% of the above table.
when the rigidity of the machine tool and the workpiece is relatively poor, vibration
and abnormal sound will be produced. At this time, the speed and feed should be
reduced in the same proportion, AP.Ae When the value is small, it can be increased in
the same proportion. D is the diameter of milling cutter.
In order to get good cutting performance and service life, it is necessary to use high
precision and high rigidity tool holder.
1.Before using the tool, please measure the tool deflection. When the tool deflection
accuracy exceeds 0.01mm, the feed speed or cutting amount will be increased.
2. The shorter the tool extends out of the chuck, the better. When the tool extends out
for a long time, please reduce the speed, feed speed or cutting amount.
3. In case of abnormal movement or sound during cutting, please reduce the spindle
speed and cutting amount until the situation is improved.
4. Steel cooling is a good way of spraying or air injection to make high titanium
aluminum perform very well, and no water-soluble cutting fluid is recommended for
stainless steel, titanium alloy or heat-resistant alloy.
5. The cutting mode depends on the influence of workpiece, machine and software.
The above data are for reference only. When the cutting condition is stable, increase
the feed speed by 30% - 50%.
Suppliers with verified business licenses